Odour-elimination

One simple solution.

 

Hydrogen sulphide (H2S), ammonia (NH3) and other biogases in the plumbing system can be completely eliminated by adding eMB products to the pipework system, pressure mains and pumping stations. Microorganisms in the eMB products remove the SRB (sulphate reducing bacteria) that are responsible for producing H2S, their basic survival needs and H2S cannot survive.

 

Unlike the dosage of oxidizing agents and direct oxygen flow in the pipework, eMB Microorganisms establish a sewer film that remains and can be sustained with very small dosages. A simple, cost-efficient solution for an age-old problem.

My question on this topic My question on this topic

 

Instructions

 

 

Odour elimination in pumping stations, pipes, pressure pipelines

 

Dosage per 5 m³ of sewage flow per day

1 l eMB Activated

 

eMB Activated is added to the pumping station or pressure pipeline using an automatic dosing station and dosing pump or a regular manual dosage (at least 3 times per week). After a while (2-8 weeks depending on the length of the pipe) the Effective Microorganisms have established themselves so well in the pipe’s sewage film that odours no longer occur and far and other secretions can no longer stick.

 

 

Odour elimination in halls and closed processing plants

 

1 l eMB Activated mixed with 100 l water (1:100)

Spray eMB solution in the area for ten minutes at least once a day, using spray guns or a hand spray device. It is optimal to install an automatic spray device that automatically sprays small amounts of eMB solution into the room several times a day.